- Make sure this fits by entering your model number.
- Allows complete automation with this simple and straightforward controller.
- Control temperature and humidity levels, then add CO2 enrichment using a Titan Controls – Atlas Series CO2 controller.
- The Saturn 2 allows for the integration of CO2 however a CO2 Controller must be purchased separately.
Intended for use in maintaining the temperature, humidity and to provide CO2 in your growing environment. Both temperature and humidity can be adjusted with the dials on the front of the controller. During the daytime hours the controller leaves the ‘CO2 OUTLET’ active until the temperature set point is exceeded. When this occurs, the ‘CO2 OUTLET’ is deactivated and then the ‘FAN OUTLET’ is activated; and your exhaust fan will run until the temperature is lower than your preferred setting. After the temperature has lowered below the selected temperature level the ‘FAN OUTLET’ is deactivated and the ‘CO2 OUTLET’ is activated and can begin dosing your garden with CO2 again, if required. This innovative function serves two purposes: One, this allows maximum CO2 coverage with minimum CO2 waste; Two, your exhaust fan is working only when it is required – saving power and wear & tear on your gear.
At any time if the humidity set point is exceeded, the controller will activate the ‘HUMIDITY OUTLET’ and reduce the humidity level to below your preferred humidity setting. During the nighttime hours the controller defeats the ‘CO2 OUTLET’ (No need for CO2 at night) and activates the ‘NIGHT OUTLET’. The ‘NIGHT OUTLET’ may be used to operate a circulation fan, CO2 exhaust fan using a short cycle timer, garden maintenance night light or any other device that you would like only to run during the nighttime hours. If during the nighttime hours the temperature exceeds your preferred setting, then the ‘FAN OUTLET’ is activated to lower the temperature to desired levels. If the humidity set point is exceeded during the nighttime hours, then the ‘HUMIDITY OUTLET” is activated and will lower the gardens humidity to desired levels.
ETL listed for use in commercial applications. Temperature control range = 40F to 100F. Humidity control range = 20% to 80%. Easy to use – Simple to operate. 15 Amps maximum/120 Volts/60 Hz.
Industrial & Scientific / Measure & Inspect / Temperature & Humidity / Test / Titan Controls
