These Oakton Safety IR Thermometer check critical food temperatures and monitor HACCP food safety zones with this combination contact/noncontact thermometer. LEDs rapidly indicate if food temperature is in the bacterial growth safety zone. Green lights indicate safe temperatures below 40°F (4°C) and above 140°F (60°C). Red light indicates the HACCP danger zone between 40 to 140°F (4 to 60°C). The contact penetration probe swings out for internal temperature checks, then folds in for storage. IR mode provides quick, noncontact surface measurements and stores maximum reading. Target illumination indicates target measurement area and is ideal for close working distances of 2 to 12″. Built-in countdown timer with alarm monitors cooking and cooling intervals and HACCP exposure times—set countdown timer to a maximum of eight hours. Specification: Temp range: Infrared: -31 to 527°F (-35 to 275°C) Contact: -40 to 392°F (-40 to 200°C); Accuracy: IR: +/- 2°F from 32 to 150°F Probe: +/- 1°F from 32 to 150°F; Dimensions: Overall: 1-1/4″W x 6-1/2″H x 2″D Contact probe: 3-1/2″L x 1/8″ diameter; Resolution: 0.5°F (0.2°C); Sighting type: LED (non-laser); Power: 9 V battery (included); Emissivity: Preset at 0.97; Display: 4-digit LCD, 3/4″W x 1″H; Distance to target size ratio: 2.5 to 1; Response time: IR: 1/2 second Probe: 5 seconds Includes: one 9 V battery, carrying case, and quick reference card; WD-35625-70 Replacement probe. Oakton #: WD-35625-40
Industrial & Scientific / Measure & Inspect / Oakton / Temperature & Humidity / Test
