- Make sure this fits by entering your model number.
- Choose from a wide variety of thermistor probes also for fast, easy use
- Push-button adjustment for fine-tuning factory calibration and easy to grip for one-handed operation
- Displays highest/lowest temperature since meter was switched on, or use Min/Max Hold Mode to continuously update lowest/highest temperature
- Freezes measurements for convenient reading and recording
- Turns off meter after 17 minutes of nonuse to save batteries and Protects meter and features a
The Oakton Temp 10 thermocouple thermometer is available in 3 different models; J, K or T input. The Temp 10 thermometers use standard miniconnectors, which allow for the use of a wide variety of probes. Push-button operation and ergonomic design provide for fast, easy, one-handed operation. Temperature units can be displayed in °C or °F. The Oakton Temp 10 thermocouple thermometer displays the minimum and maximum temperature since the meter was last switched on. The Min / Max Hold Mode can be used to continuously update lowest and highest temperature readings. The temperature offset calibration adjustment is a push button adjustment for fine-tuning factory calibration. The Oakton Temp 10 thermocouple thermometer has a hold function which freezes measurements for convenient reading and recording. The auto-off function turns the meter off after 17 minutes of non-use to save the batteries. The sealed keypad and ABS plastic case meet IP54 standards for splash resistance. The optional rubber armor adds protection and features a built-in stand. Temperature Range: -346 to 2192°F (-210 to 1200°C) Temperature Resolution: 0.1° between -199.9° and 999.9°; 1° below -199.9° and above 999.9° Temperature Accuracy: Below -238°F (-150°C): +/- 0.25% of reading +/- 2°F (1°C). Above -235°F (-150°C): +/- 0.1% of reading +/- 0.7°F (0.4°C). Temp 10 thermometers features include a large easy-to-read illuminated 4 digit display, an easy-to-use five-button control panel, Min/Max, Hold, °F / °C switchable, auto shutoff, and low battery indicator. Probes: accepts one (1) Thermocouple Probe type J with miniconnector (not included). Includes: AA batteries (3) and instructions. Oakton #: WD-35427-00
Digital Thermometers / Industrial & Scientific / Measure & Inspect / Oakton / Temperature & Humidity / Test
