Features
100% brand new and high quality
modle: STC-1000
Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.
Technical Parameters
1.Temperature measuring range: -50 ° C ~ 99 ° C
2.Resolution: 0.1 ° C;
3.Accuracy:+- 1° C (-50 ° C ~ 70 ° C);
4.Sensor error delay: 1 minute
5.Power supply: 110-220VAC , 50/60Hz;
6.Power consumption: <3W;
7.Sensor: NTC sensor (1PC);
8.Relay contact capacity: Two Relay Cool 10A/250VAC; Heat 10A/250VAC;
9.Ambient temperature: 0 ° C ~ 60 ° C;
10.Storage temperature: -30 ° C ~ 75 ° C;
11.Relative humidity: 20% ~ 85% (No condensate)
12.Sensor length: 1.0m
13.Front Panel Size:2.95×1.36in (75×34.5mm)
14Product Size: 2.95×1.36×3.35in (75×34.5x85mm)
15Mounting Size: 2.8×1.14in (71x29mm)
Package Included
1 * Temperature Controller
1 * Temperature sensor
1 * Instruction Manual
Note: Only degrees Celsius can be displayed and Fahrenheit cannot be displayed.
Remind no voltage output directly. Please use independent power supply for your heater or cooler
Industrial & Scientific / KETOTEK / Measure & Inspect / Temperature & Humidity / Test
