- Make sure this fits by entering your model number.
- Panel-mount temperature controller accepts input from RTD probes, and provides relay output for temperature regulating applications
- Microprocessor-based for ease of programming from front panel
- Four-digit LED display with set point and degrees C and F for monitoring
- On/off, PID, self-tune, and manual tune control for versatile set-up
- Front panel conforms to 1/16 DIN size for industry-standard mounting
This Dwyer D15023 Love series panel-mount temperature controller accepts input from resistance temperature detector (RTD) probes for regulating temperature. The controller is microprocessor-based for ease of programming from its front panel, which features a four-digit LED display with set point and degrees C and F indicators. The controller is equipped with on/off, proportional integral derivative (PID), self-tune, and manual tune control for versatile set-up. The controller accepts RTD 100Ω DIN (.00385 ohms/ohm/C) input, and provides relay time proportioning (RTD) output. The panel is Ingress Protection certified IP65 for protection against particles and water, and conforms to 1/16 DIN size for industry-standard mounting. This panel-mount temperature controller is Underwriters Laboratories (UL) and Canada Underwriters Laboratories (cUL) listed for safety, and is suitable for use in industrial and commercial process control applications.
Specifications | |
---|---|
Inputs | RTD 100Ω DIN (.00385 ohms/ohm/C) |
Display | 4 digit, 7 segment 0.3″ (H)* LED display |
Accuracy | +/– 0.25 percent of span +/– 1 least significant digit |
Supply voltage | 100 to 240 VAC, 50 to 400Hz single phase 132 to 240 VDC (nom.) +10 to 20 percent |
Power consumption | 5 VA maximum |
Temperature range | Operating 14 to 131 degrees F (-10 to 55 degrees C) Storage -40 to 176 degrees F (-40 to 80 degrees C) |
Output rating | Relay (SPST): 3A res., 1.5A ind. at 250 VAC |
Isolation | Relay outputs are isolated |
Sensor break protection | De-energizes control output |
Front panel rating | IP65 |
Agency approvals | UL, cUL |
Dimensions | 1.880 x 1.880 inches/48 x 48mm (H x W)* |
Weight | 8.0 oz./227.0g |
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right.
Controllers are used to read and correct temperature in environments such as pilot process plants, and research and development labs, and for original equipment manufacturer (OEM) requirements in quality control (QC) laboratories, education and research lab testing facilities.
Dwyer Instruments manufactures measurement and control instruments, including pressure gauges, flow meters, level instrumentation, temperature instrumentation, and air quality monitors. The company, founded in 1931, is headquartered in Michigan City, IN.
Dwyer / Industrial & Scientific / Measure & Inspect / Temperature & Humidity / Test