- Make sure this fits by entering your model number.
- UART Serial Interface: This module automatically output the temperature and humidity, without the need for complex calculations; Lead PIN: VCC, GND, TX, RX.
- SHT20 High-precision Temperature and Humidity Sensor: Temperature range: -40 to125 . Humidity range: 0 to 100% RH
- The default baud rate is 115200. After the power is turned on, the temperature and humidity are automatically output without any instruction.
- Working voltage 3.3V, UART Logic voltage is 3.3V, if your board is 5V TTL, please use the voltage divider.
- DSD TECH provides 1 year warranty and lifetime technical support. If you have any questions, please feel free to contact us.
This fits your .
This is a serial temperature sensor. This sensor automatically outputs temperature and humidity through the serial port without calculation;
Lead pins: VCC, GND, TX, RX.
The default baud rate 115200;
The operating voltage is 3.3V and the UART Logic voltage is 3.3V. If your board is 5V TTL, use a voltage divider.
DSD TECH offers 1 year warranty and lifetime technical support. If you have any questions, please feel free to contact us.
Industrial & Scientific / Measure & Inspect / Temperature & Humidity / Test
