- Make sure this fits by entering your model number.
- This temperature controller has two mode, switch 5th Dip to choose heating mode or cooling mode
- Power supply: 12V; output Capacitance: max current 5A, max power 1000W
- You can set the temperature referring to the attached picture “temperature control setting”
- Connect power to input(red +, black -) and load to output, put probe to where you need control temp
- Input indicator on when you connect power supply correctly, output indicator on when has output
Features:
Supply voltage: 12V
Output Capacitance: Max Current 5A, Max Power 1000W
Temperature range: -15-70 °c (5~158℉)
Control accuracy: 0.1 °c
Setting Accuracy: 5 °c
Default Temp Difference Setting : 2 °c
Thermostat probe: NTC 3950 / B = 10K (waterproof type 1M)
Instructions for use:
1: Determine the mode
Heating mode: the 5th switch up
Cooling mode: the 5th DIP switch down
2: Set the temperature
Setting the desired temperature need to adjust the four DIP switch, Please refer to the picture of “Temperature Control Setting”.
3: Connect the circuit
Directly connected to the power at the input, the output connect to the load directly, such as heaters, light bulbs, fans, etc., the temperature probe connect to the place you want to control the temperature.
Package include:
1x Temperature Control Switch
DROK / Industrial & Scientific / Measure & Inspect / Temperature & Humidity / Test
