Digital Wood Moisture Meter WNICE with LCD Display Measure The Percentage of Water in Firewood, Furniture, Floor, Cordwood and Trees(Range: 0-40%) Review

Digital Wood Moisture Meter WNICE with LCD Display Measure The Percentage of Water in Firewood, Furniture, Floor, Cordwood and Trees(Range: 0-40%)

    This fits your .
  • Make sure this fits by entering your model number.
  • ACCURATE WOOD MOISTURE TESTER: Measuring Range: 0%-40%, Accuracy: +/-0.5%, Stick integrated Electrode pins into the surface of what you are measuring in order to get a read-out
  • FAST REACTION: With large LCD characters display, quickly show the measurement, clearly and easy to read; Ergonomic size fits in your hand perfectly to get a better grip
  • Memory Function: Ability to store data and measured values in memory, Low battery indication; auto power off without operation after 10 minutes; data hold function
  • WIDE APPLICATION: Ideal for contractors,woodworkers and homeowners to measure the containing water of most wood, bamboo,paper etc
  • WHAT YOU GET: WNICE Wood Moisture Meter; 2*1.5V AAA Battery; User Manual; If you are not satisfied with the laser measure just return it for a full refund,no questions asked, no hassle

See more product details

Features:

Accurate range: Wood 2%~ 40% RH

Resolution: 0.5% Accuracy: ±0.5%

Electrode pins: Integrated

Large LCD display

Wood type select function

Measuring range: according to different tree type to select different mode

High accuracy and fast reaction

Data hold function

Display with signs and units for easy reading

Low battery indication function

Auto power shut off in 10 minutes without any operation

 

Operation

1.Insert battery and press the Hold key to power on. Long press on the key for 2 seconds to power off and it will be powered off automatically if there is no further operation on the key within 10 minutes.

2.After power on press the M key to select 4 tree type and other material. The level selection please be referred to in the checklist. If it is not listed in the checklist, it is highly recommanded to uselevel 2 to measure it with attention paying to the error resulted in. In measuring, the 2 probes must be inserted same time.

3.Press the HOLD key to lock the reading with HOLD character appearing on LCK, press the HOLD key again to cancel the hold function.

4.Press the SET key to select maximum or minimum reading.

Warning : DO NOT PLUG THE PROBES INTO ANY ELECTRICAL RECEPTACLES

Package Included: 

– 1 x WNICE Moisture Meter

– 1 x User Manual

– 2 x 1.5V AAA Battery

/ / /

Leave a Reply

Your email address will not be published. Required fields are marked *